Pass-through seals

Pass-through seal for a Ø 12/19/25/38/50/60/75/90/100 mm aerial pipe, mast, cable or roof bollard installed on a roof
Made of EPDM rubber; operating temperatures between -30 and +90°C

Pass-through seal for a Ø 110-155 mm pipe, mast, cable or roof bollard installed on a roof
Made of EPDM rubber; operating temperatures between -30 and +90°C

Pass-through seal for round pipes installed on a felt roof
Made of EPDM rubber; operating temperatures between -30 and +90°C
Should be installed with hot bitumen between two felt layers

Screw-on hot galvanized clamp for use with the VILPE® Felt Roof Seal
Should be selected based on the size of the seal and pipe

Pass-through seal for round pipes installed on a felt roof while retrofitting
Made of EPDM rubber; operating temperatures between -30 and +90°C
Should be installed with hot bitumen between two felt layers

Pass-through seal for square pipes installed on a felt roof
Made of EPDM rubber; operating temperatures between -30 and +90°C
Should be installed with hot bitumen between two felt layers

Screw-on clamp for use with the VILPE® RHS Seal
Should be selected based on the size of the seal and pipe

Pass-through seal for different kinds of pipes (e.g. mountings for billboards and flagpoles or electrical wires) installed on a metal roof while retrofitting
Made of EPDM rubber; operating temperatures between -30 and +90°C
Should be installed with hot bitumen between two felt layers

Pass-through seal for different kinds of pipes (e.g. mountings for billboards and flagpoles or electrical wires) installed on a metal roof
Made of EPDM rubber; operating temperatures between -30 and +90°C
Should be installed with hot bitumen between two felt layers

Vapour barrier seal for pipes installed through the vapour barrier on an inclined or low-pitched roof (height 33 mm)
Made of EPDM rubber; operating temperatures between -30 and +90°C
Should be installed with bitumen if a roof's vapour barrier is made of bitumen, and with a board made of hard material on top of the vapour barrier valve if a roof's underlay material is made of profiled sheet metal

Tall vapour barrier seal for pipes installed through the vapour barrier on an inclined or low-pitched roof (height 133 mm)
Made of EPDM rubber; operating temperatures between -30 and +90°C
Should be installed with bitumen if a roof's vapour barrier is made of bitumen, and with a board made of hard material on top of the vapour barrier valve if a roof's underlay material is made of profiled sheet metal

Pass-through seal for round pipes installed on a PVC roof
Made of coloured polyvinyl chloride (PVC)
Should be installed with hot air welding

Pass-through seal for square pipes installed on a felt roof ​while retrofitting
Made of EPDM rubber; operating temperatures between -30 and +90°C
Should be installed with hot bitumen between two felt layers

For leading antennas, flagpoles and other pipes and bollards through the roof
Stepped EPDM rubber, installed on a separately available VILPE® XL pass-through
The pass-through is chosen according to the roofing material