Torx tools, drill extensions and screws

High-quality tools from VILPE, for example torx tools, drill extensions and screws. Find the right product here.

Show all products

150-2x torx bit

For the concrete nail of Croco B 110 is drilled Ø 5 mm hole with drill bit which is fastened to drill bit extension. The normal SDS+ drills can be used when the insulation is not very thick. The concrete nails are installed with blow stick and drilling hammer.

350-2x torx bit

Powers with round body are installed with 6-angle installation bits. It depends on the hole size of the Power if Power bit or Torx bit can be used. Power A Adjustables can only be installed with the longer bits. Power with square body is installed with square special bit.

550-2x torx bit

Lyöntilaite

Lyöntilaitteen tappi

480-Handpeg

For Croco 512 a hole of Ø 12 mm is drilled with edge drill to the aereted concrete (Siporex). The steel wedge of the 60-300 mm long Croco 512 -fastener is installed with setting tool or peg for setting tool. The steel wedge of the 250-500 mm long Croco 512 -fastener is installed with handpeg.

M-Drill Extension

M-Drill

SDS+Drill

700-2X TORX BIT

For the concrete nail of Croco B 110 is drilled Ø 5 mm hole with drill bit which is fastened to drill bit extension. The normal SDS+ drills can be used when the insulation is not very thick. The concrete nails are installed with blow stick and drilling hammer.

K-Drill 5/28

Double-ended installation bit for Drill point screws and Croco B-110. Lenght of the bit is chosen according to lenght of the fastener. We recommend that the bit is at least 30 mm longer than the fastener.

K-Drill extencion SDS

12 x600 Siporex drill