AERIAL SLEEVE 12-100 MM Pass-through seal for a Ø 12/19/25/38/50/60/75/90/100 mm aerial pipe, mast, cable or roof bollard installed on a roofMade of EPDM rubber; operating temperatures between -30 and +90°C
Pipe Sealing 110–155 Pass-through seal for a Ø 110-155 mm pipe, mast, cable or roof bollard installed on a roofMade of EPDM rubber; operating temperatures between -30 and +90°C
Felt Roof Seal Pass-through seal for round pipes installed on a felt roofMade of EPDM rubber; operating temperatures between -30 and +90°CShould be installed with hot bitumen between two felt layers
Clamp Screw-on hot galvanized clamp for use with the VILPE® Felt Roof SealShould be selected based on the size of the seal and pipe
R-Felt Set Pass-through seal for round pipes installed on a felt roof while retrofittingMade of EPDM rubber; operating temperatures between -30 and +90°CShould be installed with hot bitumen between two felt layers
RHS Seal Pass-through seal for square pipes installed on a felt roofMade of EPDM rubber; operating temperatures between -30 and +90°CShould be installed with hot bitumen between two felt layers
ROOFSEAL RETROFIT SET Pass-through seal for different kinds of pipes (e.g. mountings for billboards and flagpoles or electrical wires) installed on a metal roof while retrofittingMade of EPDM rubber; operating temperatures between -30 and +90°CShould be installed with hot bitumen between two felt layers
ROOFSEAL SET Pass-through seal for different kinds of pipes (e.g. mountings for billboards and flagpoles or electrical wires) installed on a metal roofMade of EPDM rubber; operating temperatures between -30 and +90°CShould be installed with hot bitumen between two felt layers
Vapour Barrier Seal Vapour barrier seal for pipes installed through the vapour barrier on an inclined or low-pitched roof (height 33 mm)Made of EPDM rubber; operating temperatures between -30 and +90°CShould be installed with bitumen if a roof's vapour barrier is made of bitumen, and with a board made of hard material on top of the vapour barrier valve if a roof's underlay material is made of profiled sheet metal
Tall Vapour Barrier Seal Tall vapour barrier seal for pipes installed through the vapour barrier on an inclined or low-pitched roof (height 133 mm)Made of EPDM rubber; operating temperatures between -30 and +90°CShould be installed with bitumen if a roof's vapour barrier is made of bitumen, and with a board made of hard material on top of the vapour barrier valve if a roof's underlay material is made of profiled sheet metal
PVC Roof Seal Pass-through seal for round pipes installed on a PVC roofMade of coloured polyvinyl chloride (PVC)Should be installed with hot air welding
RHS CLAMP Description: Hot-dip-galvanized clamp for fixing square VILPE RHS Seal. The clamp is chosen according to the pipe size. Contents: Two-piece clamp.
RHS-Felt Retrofitting Seal 80-150 Pass-through seal for square pipes installed on a felt roof while retrofittingMade of EPDM rubber; operating temperatures between -30 and +90°CShould be installed with hot bitumen between two felt layers
ROOFSEAL Description: Pass-through seal for different kinds of pipes (e.g. mountings for billboards and flagpoles or electrical wires) installed on a metal roof. The weather- and ozone-resistant properties of EPDM rubber are the best possible, and it can endure continuous heat stress of +90°C (and intermittently up to +150°C). EPDM rubber also tolerates the acids and alkalis often found in the air in industrial areas. Should be installed with hot bitumen between two felt layers. Dimensions: Available in 6 different sizes with diameters 12-521 mm. Contents: Seal
XL PIPE SEALING 175–250 For leading antennas, flagpoles and other pipes and bollards through the roofStepped EPDM rubber, installed on a separately available VILPE® XL pass-throughThe pass-through is chosen according to the roofing material
