Find products

TILE CLICK PASS-THROUGH

The most common concrete tile roofing types.

UNITILE CLICK PASS-THROUGH

For all tile roofings.

Includes a Click underlay seal for easier installation.

VITTINGE CLICK PASS-THROUGH

Vittinge clay tile roofing.

Includes a Click underlay seal for easier installation.

EVO CLICK PASS-THROUGH

Monier/Braas Teviva/Braas Tegalit plain tiles with length 420 mm, width 330 mm.

Includes a Click underlay seal for easier installation.

CLASSIC LOIVA CLICK PASS-THROUGH

Plain standing seam roofing with roof pitches of 5-27°.

Includes a Click underlay seal for easier installation.

CLASSIC VINO CLICK PASS-THROUGH

Plain standing seam roofing.

Minimum roof pitch 1:5 (11,5°).

Includes a Click underlay seal for easier installation.

PROFILED STEEL CLICK PASS-THROUGH

For all round profiled metal sheet roofing types (tilepatterned).

Mouldable and fully waterproof.

Includes a Click underlay seal for easier installation.

NERA CLICK PASS-THROUGH

For Ruukki´s Finnera or Finnera Plus.

Includes a Click underlay seal for easier installation.

STEEL CLICK PASS-THROUGH

For low profiled metal sheet roofing

Waterproof

Includes a Click underlay seal for easier installation

AALTO CLICK PASS-THROUGH

For Ruukki´s Adamante or similar metal sheet roofing.

Includes a Click underlay seal for easier installation.

HYYGGE CLICK PASS-THROUGH

For Ruukki´s Hyygge or similar metal sheet roofing.

Includes a Click underlay seal for easier installation.

Nova Click pass-through

For Ruukki’s Frigge or similar sheet metal roofs.

The seal on the bottom of the pass-through guarantees a fully waterproof end result.

DECRA CLICK PASS-THROUGH

For Decra roofs.

Includes a Click underlay seal for easier installation.

CLASSIC PASS-THROUGH LOW PITCH

Plain standing seam roofing with roof pitches of 5-27°.

Thick rubber seal on the bottom of the flange.

Evo 2K Pass-Through

For plain Monier/Braas Teviva/Braas Tegalit tile roofs (with 420 mm by 330 mm tiles)

Includes Underlay 2K Seal, the solution for completely waterproofing the underlay

Designed for Ø 110, 125 or 160 mm pipes

Classic Vino 2K Pass-Through

For plain standing seam roofs or felt roofs (if retrofitted); can be installed on roofs with pitches between 1:5 (11.5 degrees) and 57 degrees

Includes Underlay 2K Seal, the solution for completely waterproofing the underlay

Designed for Ø 110, 125 or 160 mm pipes

Unitile 2K Pass-Through

For all tile roofs (ceramic, clay, concrete and special tiles, 1- and 2-wave tiles and plain tiles)

Includes Underlay 2K Seal, the VILPE solution for completely waterproofing the underlay

Designed for Ø 110, 125 or 160 mm pipes

Profiled Steel 2K Pass-Through

For round-profile sheet metal roofs (minimum profiled roof tile length 350 mm)

Includes Underlay 2K Seal, the VILPE solution for completely waterproofing the underlay

Designed for Ø 110, 125 or 160 mm pipes

Aalto 2K Pass-Through

For sheet metal roofs such as Ruukki’s Adamante, or other equivalent round-profile, tile-patterned roofs

Includes Underlay 2K Seal, the VILPE solution for completely waterproofing the underlay

Designed for Ø 110, 125 or 160 mm pipes

Tile Pass-Through

For most common concrete tile roofs (replaces one 2-wave concrete tile with a width of up to 330 mm and a wave height of 27-40 mm)

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 110, 125 or 160 mm pipes

Unitile Pass-Through

For all tile roofs (ceramic, clay, concrete and special tiles, 1- and 2-wave tiles and plain tiles)

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 110, 125 or 160 mm pipes

Vittinge Pass-Through

For vittinge clay tile roofs

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 110, 125 or 160 mm pipes

Evo Pass-Through

For plain Monier/Braas Teviva/Braas Tegalit tile roofs (with 420 mm by 330 mm tiles)

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 110, 125 or 160 mm pipes

Classic Vino Pass-Through

For plain standing seam roofs or felt roofs (if retrofitted); can be installed on roofs with pitches between 1:5 (11.5 degrees) and 57 degrees

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 110, 125 or 160 mm pipes