UNITILE CLICK PASS-THROUGH For all tile roofings.Includes a Click underlay seal for easier installation.
VITTINGE CLICK PASS-THROUGH Vittinge clay tile roofing.Includes a Click underlay seal for easier installation.
EVO CLICK PASS-THROUGH Monier/Braas Teviva/Braas Tegalit plain tiles with length 420 mm, width 330 mm.Includes a Click underlay seal for easier installation.
CLASSIC LOIVA CLICK PASS-THROUGH Plain standing seam roofing with roof pitches of 5-27°.Includes a Click underlay seal for easier installation.
CLASSIC VINO CLICK PASS-THROUGH Plain standing seam roofing.Minimum roof pitch 1:5 (11,5°).Includes a Click underlay seal for easier installation.
PROFILED STEEL CLICK PASS-THROUGH For all round profiled metal sheet roofing types (tilepatterned).Mouldable and fully waterproof.Includes a Click underlay seal for easier installation.
NERA CLICK PASS-THROUGH For Ruukki´s Finnera or Finnera Plus.Includes a Click underlay seal for easier installation.
STEEL CLICK PASS-THROUGH For low profiled metal sheet roofingWaterproofIncludes a Click underlay seal for easier installation
AALTO CLICK PASS-THROUGH For Ruukki´s Adamante or similar metal sheet roofing.Includes a Click underlay seal for easier installation.
HYYGGE CLICK PASS-THROUGH For Ruukki´s Hyygge or similar metal sheet roofing.Includes a Click underlay seal for easier installation.
NOVA CLICK PASS-THROUGH For Ruukki’s Frigge or similar sheet metal roofs.The seal on the bottom of the pass-through guarantees a fully waterproof end result.
CARISMA CLICK PASS-THROUGH Benders Carisma concrete tile roofs.The pass-through replaces one roof tile.Includes a Click underlay sela for easier installation.
HS PASS-THROUGH For all slate, shingle and felt roofs; ; can be installed on roofs with pitches between 1:5 (11.5 degrees) and 50 degreesSeal on the bottom of the pass-through guarantees a fully waterproof end resultDesigned for Ø 110, 125 or 160 mm pipes
FELT PASS-THROUGH For felt roofs, minimum roof pitch 1:5 (11.5 degrees); also suitable for slate roofsSeal on the bottom of the pass-through guarantees a fully waterproof end resultDesigned for Ø 110, 125 or 160 mm pipes
FELT TALL PASS-THROUGH For felt roofs with a pitch of less than 1:5 (11.5 degrees)Seal on the bottom of the pass-through guarantees a fully waterproof end resultDesigned for Ø 110, 125 or 160 mm pipes
ETERNIT B9 PASS-THROUGH For fibre-cement roofs (with a tile width of 177 mm and a wave height of 57 mm)Seal on the bottom of the pass-through guarantees a fully waterproof end resultDesigned for Ø 110, 125 or 160 mm pipes
CLICK UNDERLAY SEAL For attaching the underlay to battensPrevents water from seeping into the insulationAdhesive is not needed
XL TILE PASS-THROUGH For most common concrete tile roofs (replaces two 2-wave concrete tiles with a width of up to 330 mm and a wave height of 27-40 mm)Seal on the bottom of the pass-through guarantees a fully waterproof end resultDesigned for Ø 160-250 mm pipes
XL UNIVERSAL PASS-THROUGH For all profiled steel and tile roofsSeal on the bottom of the pass-through guarantees a fully waterproof end resultDesigned for Ø 160-250 mm pipes
XL CLASSIC PASS-THROUGH For plain standing seam roofs or felt roofs (if retrofitted); minimum roof pitch 1:5 (11.5°)Seal on the bottom of the pass-through guarantees a fully waterproof end resultDesigned for Ø 160-250 mm pipes
XL FELT PASS-THROUGH For felt roofs, minimum roof pitch 1:5 (11.5°)Seal on the bottom of the pass-through guarantees a fully waterproof end resultDesigned for Ø 160-250 mm pipes
XL FELT TALL PASS-THROUGH For felt roofs with a pitch of less than 1:5 (11.5°)Seal on the bottom of the pass-through guarantees a fully waterproof end resultDesigned for Ø 160-250 mm pipes
