Find products

TILE CLICK PASS-THROUGH

The most common concrete tile roofing types.

UNITILE CLICK PASS-THROUGH

For all tile roofings.

Includes a Click underlay seal for easier installation.

VITTINGE CLICK PASS-THROUGH

Vittinge clay tile roofing.

Includes a Click underlay seal for easier installation.

EVO CLICK PASS-THROUGH

Monier/Braas Teviva/Braas Tegalit plain tiles with length 420 mm, width 330 mm.

Includes a Click underlay seal for easier installation.

CLASSIC LOIVA CLICK PASS-THROUGH

Plain standing seam roofing with roof pitches of 5-27°.

Includes a Click underlay seal for easier installation.

CLASSIC VINO CLICK PASS-THROUGH

Plain standing seam roofing.

Minimum roof pitch 1:5 (11,5°).

Includes a Click underlay seal for easier installation.

PROFILED STEEL CLICK PASS-THROUGH

Description: All round profiled metal sheet roofing types (tilepatterned). Minimum length of tile pattern 350 mm. Mouldable and fully waterproof thanks to the rubber seal on the bottom surface. Used with VILPE P-series ⌀ 110–160 mm roof fans and ventilation pipes. Contents: Pass-through, Click underlay seal, screws, installation instructions/template.

NERA CLICK PASS-THROUGH

Description: Ruukki´s Finnera or Finnera Plus or similar roofing. Formerly called VILPE® SPT 60 pass-through or Finnera Plus. Contents: Pass-through, Click underlay seal, screws, template.

STEEL CLICK PASS-THROUGH

For low profiled metal sheet roofing

Waterproof

Includes a Click underlay seal for easier installation

AALTO CLICK PASS-THROUGH

Description: Ruukki´s Adamante or similar metal sheet roofing. Contents: Pass-through, Click underlay seal, screws, installation instructions/templates for the underlay seal and the pass-through.

HYYGGE CLICK PASS-THROUGH

Description: Ruukki´s Hyygge or similar metal sheet roofing. Contents: Pass-through, Click underlay seal, screws, installation instructions/templates for the underlay seal and the pass-through.

Nova Click pass-through

For Ruukki’s Frigge or similar sheet metal roofs.

The seal on the bottom of the pass-through guarantees a fully waterproof end result.

DECRA CLICK PASS-THROUGH

Description: For Decra roofs. The seal on the bottom of the pass-through guarantees a fully waterproof end result, and is attached to the bottom of the flange. Dimensions: Length 374 mm, width 290 mm. Contents: Pass-through, Click underlay seal, sealing compound, screws, installation instructions.

CLASSIC PASS-THROUGH LOW PITCH

Plain standing seam roofing with roof pitches of 5-27°.

Thick rubber seal on the bottom of the flange.

Evo 2K Pass-Through

For plain Monier/Braas Teviva/Braas Tegalit tile roofs (with 420 mm by 330 mm tiles)

Includes Underlay 2K Seal, the solution for completely waterproofing the underlay

Designed for Ø 110, 125 or 160 mm pipes

Classic Vino 2K Pass-Through

For plain standing seam roofs or felt roofs (if retrofitted); can be installed on roofs with pitches between 1:5 (11.5 degrees) and 57 degrees

Includes Underlay 2K Seal, the solution for completely waterproofing the underlay

Designed for Ø 110, 125 or 160 mm pipes

Unitile 2K Pass-Through

For all tile roofs (ceramic, clay, concrete and special tiles, 1- and 2-wave tiles and plain tiles)

Includes Underlay 2K Seal, the VILPE solution for completely waterproofing the underlay

Designed for Ø 110, 125 or 160 mm pipes

Profiled Steel 2K Pass-Through

For round-profile sheet metal roofs (minimum profiled roof tile length 350 mm)

Includes Underlay 2K Seal, the VILPE solution for completely waterproofing the underlay

Designed for Ø 110, 125 or 160 mm pipes

Aalto 2K Pass-Through

For sheet metal roofs such as Ruukki’s Adamante, or other equivalent round-proﬁle, tile-patterned roofs

Includes Underlay 2K Seal, the VILPE solution for completely waterproofing the underlay

Designed for Ø 110, 125 or 160 mm pipes

Tile Pass-Through

For most common concrete tile roofs (replaces one 2-wave concrete tile with a width of up to 330 mm and a wave height of 27-40 mm)

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 110, 125 or 160 mm pipes

Unitile Pass-Through

For all tile roofs (ceramic, clay, concrete and special tiles, 1- and 2-wave tiles and plain tiles)

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 110, 125 or 160 mm pipes

Vittinge Pass-Through

For vittinge clay tile roofs

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 110, 125 or 160 mm pipes

Evo Pass-Through

For plain Monier/Braas Teviva/Braas Tegalit tile roofs (with 420 mm by 330 mm tiles)

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 110, 125 or 160 mm pipes

Classic Vino Pass-Through

For plain standing seam roofs or felt roofs (if retrofitted); can be installed on roofs with pitches between 1:5 (11.5 degrees) and 57 degrees

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 110, 125 or 160 mm pipes