Discontinued - Vilpe

All of our discontinued products can be found from this category. Old product pages are no longer updated. If you have trouble finding discontinued product or product information, contact our sales & technical support.
Sales & Technical support
Tel. +358 20 123 3222
sales@vilpe.com
Open Mon-Fri: 08.00-16.00

Show all products

ECo 110P/Ø110/500 Roof Fan

Energy-efficient roof fan with EC motor for radon ventilation

Also suitable for ventilating an ecological toilet

E120S/Ø125 Roof Fan + Installation Set

Roof fan for the top of an air conduit or silencer

E120P/Ø125/500 Roof Fan

Insulated roof fan

Includes a galvanized steel inner pipe with a lip seal

Controller 2299 UCJ

PRODUCT DISCONTINUED: NEW MODEL AVAILABLE FEBRUARY

Controller for adjusting VILPE AC roof fan rotation speed

Flush mounting only

Desktop CO2 Monitor

Desktop unit for measuring CO2 concentration and temperature in ambient air

Smart, compact and easy-to-use

Data can be saved when connected to a computer

ECo 110C/Ø110/400 Roof Fan

Energy-efficient insulated roof fan with EC motor for radon ventilation

Also suitable for ventilating an ecological toilet

Should be installed in a sheet metal cone with a Ø 170 mm opening, made by a tinsmith

E120C/Ø125/400 ROOF FAN

Insulated roof fan

Includes a galvanized steel inner pipe with a lip seal

Should be installed in a sheet metal cone with a Ø 170 mm opening, made by a tinsmith

ECO250P/Ø200/500 XL ROOF FAN

Description: Energy-efficient insulated XL roof fan with a DC motor, controlled with a 0–10 V voltage. Inner pipe is made of perforated, galvanized sheet metal and has a lip seal. A VILPE ECo Controller and a VILPE XL pass-through according to the roofing material are required separately. Dimensions: Duct size Ø 200 mm, external Ø 300 mm, height above roof approx. 500 mm. Contents: Roof fan, screws, Installation, operating and maintenance instructions. This product will be replaced by a modern and energy efficient FLOW product.

E120P/Ø125/400 ROOF FAN

Description: Insulated roof fan. Inner pipe is made of galvanized steel and has a lip seal. A VILPEpass-through according to the roofing material is required separately. Dimensions: Duct size Ø 125 mm, external Ø 160 mm, height above roof approx. 400 mm. Contents: Roof fan, screws, installation, operating and maintenance instructions.

E220P/Ø160/500 XL ROOF FAN

Description: Insulated XL roof fan. Inner pipe is made of galvanized sheet metal and has a lip seal. A VILPE XL pass-through according to the roofing material is required separately. Dimensions: Duct size Ø 160 mm, external Ø 300 mm, height above roof approx. 500 mm. Contents: Roof fan, screws, Installation, operating and maintenance instructions. Compatible controllers

ECO250S/Ø200 XL ROOF FAN + INSTALLATION SET

Description: Energy-efficient insulated roof fan with a DC motor for the top of an air conduit or silencer, controlled with a 0–10 V voltage. An installation set for installation on a flat surface is included. VILPE ECo Controller is available separately. Dimensions: Duct size Ø 200 mm, (installation set 400 x 400 mm, installation area must be at least the same size). Contents: Roof fan, installation set, screws, Installation, operating and maintenance instructions. This product will be replaced by a modern and energy efficient FLOW product.

125S Exhaust Vent 250 X 250

Exhaust vent for a flat surface

160S Exhaust Vent 300 X 300

Exhaust vent for a flat surface

125C/IS/400 Exhaust Ventilation Pipe

Insulated exhaust ventilation pipe with cowl

Includes a galvanized steel inner pipe with a lip seal

Should be installed in a sheet metal cone with a Ø 170 mm opening, made by a tinsmith

110P/300 Ventilation Pipe + Cowl

Uninsulated ventilation pipe with cowl

110P/IS/350 Ventilation Pipe + Cowl

Insulated ventilation pipe with cowl

125P/IS/500 Exhaust Ventilation Pipe

Insulated exhaust ventilation pipe with cowl

Includes a galvanized steel inner pipe with a lip seal

160P/IS/500 Exhaust Ventilation Pipe

Insulated exhaust ventilation pipe with cowl

Includes a galvanized steel inner pipe with a lip seal

Cowl 160

Cowl for VILPE ventilation pipe with external dimensions Ø 160 mm (i.e. insulated pipe for duct sizes Ø 110 or Ø 125 mm)

Cowl serves as a radon ventilator when attached to a Ø 110 insulated pipe

75P/IS/500 Exhaust Ventilation Pipe

Insulated exhaust ventilation pipe with cowl

160C/IS/400 EXHAUST VENTILATION PIPE

Description: Insulated exhaust ventilation pipe with a cowl. Inner pipe is made of galvanized steel and has a lip seal. Installed in a sheet metal cone with opening Ø 230 mm, made by a sheet metal worker. Dimensions: Duct size Ø 160 mm, external Ø 225 mm, height 400 mm. Contents: Exhaust ventilation pipe, cowl, screws.

160C/IS/450 XL EXHAUST VENTILATION PIPE

Description: Insulated exhaust ventilation XL pipe with a cowl. Inner pipe is made of galvanized steel and has a lip seal. Installed in a sheet metal cone with opening Ø 315 mm, made by a sheet metal worker. Dimensions: Duct size Ø 160 mm, external Ø 300 mm, height 450 mm. Contents: Exhaust ventilation pipe, cowl, screws.

200C/IS/450 XL EXHAUST VENTILATION PIPE

Description: Insulated exhaust ventilation XL pipe with a cowl. Inner pipe is made of galvanized steel and has a lip seal. . Installed in a sheet metal cone with opening Ø 315 mm, made by a sheet metal worker. Dimensions: Duct size Ø 200 mm, external Ø 300 mm, height 450 mm. Contents: Exhaust ventilation pipe, cowl, screws.

250C/IS/450 XL EXHAUST VENTILATION PIPE

Description: Insulated exhaust ventilation XL pipe with a cowl. Inner pipe is made of galvanized steel and has a lip seal. Installed in a sheet metal cone with opening Ø 315 mm, made by a sheet metal worker. Dimensions: Duct size Ø 250 mm, external Ø 300 mm, height 450 mm. Contents: Exhaust ventilation pipe, cowl, screws.