High-quality pass-throughs for steel roofing

High-quality and easy to install pass-throughs for steel roofing from VILPE. One person can do the installation and no special knowledge is needed. All parts required for the installation are included. Find the right product here.

Show all products

CLASSIC PASS-THROUGH LOW PITCH

Description: Plain standing seam roofing with roof pitches of 5-27°. Thick rubber seal on the bottom of the flange. Contents: Pass-through, underlay ring, screws, installation instructions/templates for the underlay seal and the pass-through.

Classic Vino 2K Pass-Through

For plain standing seam roofs or felt roofs (if retrofitted); can be installed on roofs with pitches between 1:5 (11.5 degrees) and 57 degrees

Includes Underlay 2K Seal, the new-generation VILPE® solution for completely waterproofing the underlay

Designed for Ø 75, 110, 125 or 160 mm pipes

Profiled Steel 2K Pass-Through

For round-profile sheet metal roofs (minimum profiled roof tile length 350 mm)

Includes Underlay 2K Seal, the new-generation VILPE® solution for completely waterproofing the underlay

Designed for Ø 75, 110, 125 or 160 mm pipes

Aalto 2K Pass-Through

For sheet metal roofs such as Ruukki’s Adamante, or other equivalent round-proﬁle, tile-patterned roofs

Includes Underlay 2K Seal, the new-generation VILPE® solution for completely waterproofing the underlay

Designed for Ø 75, 110, 125 or 160 mm pipes

Classic Vino Pass-Through

For plain standing seam roofs or felt roofs (if retrofitted); can be installed on roofs with pitches between 1:5 (11.5 degrees) and 57 degrees

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 75, 110, 125 or 160 mm pipes

Steel Pass-Through

For low-profile sheet metal roofs; not suitable for high-angular profiles

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 75, 110, 125 or 160 mm pipes

Hyygge Pass-Through

For Ruukki´s Hyygge or similar sheet metal roofs

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 75, 110, 125 or 160 mm pipes

Aalto Pass-Through

For sheet metal roofs such as Ruukki’s Adamante, or other equivalent round-proﬁle, tile-patterned roofs

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 75, 110, 125 or 160 mm pipes

Eternit B9 Pass-Through

For fibre-cement roofs (with a tile width of 177 mm and a wave height of 57 mm)

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 75, 110, 125 or 160 mm pipes

XL Universal MK1 Pass-Through

For profiled steel roofs (with tiles which have a wave distance of 183.3 mm, wave length of 350 mm and wave height of 39 mm--e.g. Ruukki Monterrey)

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 160-250 mm pipes

XL Classic Pass-Through

For plain standing seam roofs or felt roofs (if retrofitted); minimum roof pitch 1:5 (11.5°)

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 160-250 mm pipes

Profiled Steel Pass-Through

For round-profile sheet metal roofs (with min. 350 mm patterned tiles)

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 75-160 mm pipes

Nova Pass-Through

For Ruukki’s Frigge or similar sheet metal roofs

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 75, 110, 125 or 160 mm pipes

Decra Pass-Through

For Decra roofs

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 110-160 mm pipes

Nera Pass-Through

For Ruukki´s Finnera or Finnera Plus roofs

Seal on the bottom of the pass-through guarantees a fully waterproof end result

Designed for Ø 110-160 mm pipes

Pass-throughs for steel roofing