The VILPE® Solar pass-through is suitable for passing through various small pipes, e.g. solar collector pipes. The Solar pass-through range includes a solution for all roofing materials. Unlike other VILPE® pass-throughs, Solar passthroughs include a pre-attached coupling ring. Furthermore, the pass-through set includes a flange, a cover, a shrinking tube and the screws needed for installation.
The cover of a Solar pass-through is detachable, which facilitates service procedures of the pipes. The flange and the cover can be turned sideways 90 degrees to the direction of the pipes. This facilitates the installation and ensures a safe passing through. The size of the pipe hole in the front of the Solar pass-through is 100mm x 60mm.
The Classic pass-through set is designed for the pass-through of standing seam roofings. The width of the Classic pass-through is 266 mm and the length 328 mm. The Classic pass-through set can be retrofitted as the pass-through of felt roofing.
There is a thick grooved rubber moulding under the flange of the Classic pass-throughs that makes the pass-through set waterproof. A seal for underlay and screws is included in the pass-through sets. Sealing compound must be used when the pass-through set is installed on a felt roof.