Classic Pass-Through

Description: For plain standing seam roofs or felt roofs (if retrofitted); minimum roof pitch 1:5 (11.5 degrees). The seal on the bottom of the pass-through guarantees a fully waterproof end result, and is attached to the bottom of the flange. Installing the VILPE Classic Pass-Through is simple and easy: the kit includes all installation materials and clear instructions. The pass-through enables the installation of VILPE roof fans, exhaust pipes, ventilation pipes and antenna pass-throughs onto the roof. Designed for Ø 75, 110, 125 or 160 mm pipes. Sealing compound (not incl.) required for installation on felt roofs.

Contents: Pass-through, underlay ring, screws, installation instructions.

Color
Light Grey
Black
Brown
Blue
Green
Grey
Red
Brick Red
Chocolate Brown
Anthracite
Product number732561
LVI Code7820024
EAN Code6410457325610
Color Light Grey | RAL7040
Weight Gross: 0.902kg, Net: 0.622kg
Product number732562
LVI Code7813133
EAN Code6410457325627
Color Black | RR33 | RAL9005
Weight Gross: 0.845kg, Net: 0.565kg
Product number732564
LVI Code7813134
EAN Code6410457325641
Color Brown | RR32
Weight Gross: 0.845kg, Net: 0.565kg
Product number732565
EAN Code6410457325658
Color Blue | RR35 | RAL5007
Weight Gross: 0.981kg, Net: 0.721kg
Product number732566
LVI Code7813135
EAN Code6410457325665
Color Green | RR11
Weight Gross: 0.845kg, Net: 0.565kg
Product number732567
LVI Code7813136
EAN Code6410457325672
Color Grey | RR23 | RAL7015
Weight Gross: 0.845kg, Net: 0.565kg
Product number732568
LVI Code7813137
EAN Code6410457325689
Color Red | RR29 | RAL3009
Weight Gross: 0.845kg, Net: 0.565kg
Product number732569
LVI Code7813138
EAN Code6410457325696
Color Brick Red | RR750 | RAL8004
Weight Gross: 0.845kg, Net: 0.565kg
Product number73256B
EAN Code6417323850184
Color Chocolate Brown | RR887
Weight Gross: 0.84kg, Net: 0.561kg
Product number73256G
EAN Code6417323850535
Color Anthracite
Weight Gross: 0.981kg, Net: 0.721kg
Share product page

Materials & Installation

Send document by email

  • This field is for validation purposes and should be left unchanged.

Videos